SINGLE-SCREW EXTRUDERS

XTR-series Extruders are available in different versions, in order to fit with different processes and downstream.

XTR standard version, with low base stand for blown film applications, or with high basement for different applications such as extrusion of cast film, sheet, pipes and profiles.

Screws diameters are available from 20 mm to 120 mm. 

The different screw profiles enable the process multiple types of polymers; in sizes 20, 25 and 35 mm; often used in our pilot plant or for laboratory use, the gearbox is sized and customized to allow the extraction of the screw from the back of the extruder, making easier the cleaning operations and the possible replacement of the screw.

XTR-WR, XTR extruders with screw and cylinder made in order to have greater wear resistance, especially if used to extrude recycled and mineral filled materials; the cylinder is bimetallic and made of special steel, the screw is made of special steel with coating.

XTR-D, XTR extruders-series with degassing port, atmospheric or with a vacuum pump connection.

xtr35
xtr35
press to zoom
XTR 50
XTR 50

with gear pump for hotmelt application

press to zoom
XTR 25
XTR 25

with air cooling pelletizer

press to zoom
XTR 60
XTR 60

low center base for blown film

press to zoom
XTR90
XTR90

for PP extrusion coating application

press to zoom
XTR 130
XTR 130

33 LD for PP extrusion

press to zoom
XTR20
XTR20

laboratory masterbatch application

press to zoom
XTR 25
XTR 25

vented type, with downstream for masterbatch samples productions

press to zoom
XTR45
XTR45

35 LD for TPU extrusion

press to zoom